このアイテムのアクセス数: 125
このアイテムのファイル:
| ファイル | 記述 | サイズ | フォーマット | |
|---|---|---|---|---|
| 10.2493jjspe.75.520.pdf | 1.17 MB | Adobe PDF | 見る/開く |
| タイトル: | 計測融合型加工システムによる工具刃先運動の転写率の測定 |
| 著者: | 河野, 大輔    https://orcid.org/0000-0001-5106-8249 (unconfirmed)松原, 厚 小池, 雄介  |
| 著者名の別形: | Kono, Daisuke Matsubara, Atsushi Koike, Yusuke |
| キーワード: | tool motion workpiece profile on-machine measurement copying rate measurement-fused machining system |
| 発行日: | Apr-2009 |
| 出版者: | 精密工学会 |
| 誌名: | 精密工学会誌 |
| 巻: | 75 |
| 号: | 4 |
| 開始ページ: | 520 |
| 終了ページ: | 524 |
| 抄録: | This study investigates the copying rate of tool motions to workpiece profiles. A machining system is developed to measure tool motions and workpiece profiles during machining processes. Tool motions are measured with a laser displacement sensor and an artifact. Workpiece profiles are measured by scanning type on-machine measurement. Sinusoidal profiles with various amplitudes are machined with a diamond tool to compare tool motions and workpiece profiles. The experimental result shows that the commanded motions and vibrations are copied on workpiece profiles. The ratios between the amplitudes of motions and profiles are calculated in the frequency domain to identify the copying rate. It is verified that the commanded motions are almost perfectly copied under the amplitudes of from 0.5 μm to 4 μm and the developed system is able to identify the copying rate under the amplitudes of from 0.5 μm to 1 μm. |
| 著作権等: | 精密工学会 |
| URI: | http://hdl.handle.net/2433/153352 |
| DOI(出版社版): | 10.2493/jjspe.75.520 |
| 出現コレクション: | 学術雑誌掲載論文等 |
このリポジトリに保管されているアイテムはすべて著作権により保護されています。