ダウンロード数: 143
このアイテムのファイル:
ファイル | 記述 | サイズ | フォーマット | |
---|---|---|---|---|
aijs.80.1559.pdf | 3.17 MB | Adobe PDF | 見る/開く |
タイトル: | 曲げせん断型モデルとARXモデルを用いた強制加振による建物のシステム同定 |
その他のタイトル: | STIFFNESS IDENTIFICATION of BUILDING with UNKNOWN VIBRATION SOURCE USING BENDING-SHEAR MODEL and ARX MODEL |
著者: | 城野, みなみ 藤田, 皓平 https://orcid.org/0000-0002-4292-6819 (unconfirmed) 竹脇, 出 https://orcid.org/0000-0002-5673-2409 (unconfirmed) |
著者名の別形: | Shirono, Minami Fujita, Kohei Takewaki, Izuru |
キーワード: | システム同定 構造ヘルスモニタリング 未知の振動源 曲げせん断型モデル ARXモデル System identification Structural health monitoring Unknown vibration source Bending-shear model ARX model |
発行日: | Oct-2015 |
出版者: | 日本建築学会 |
誌名: | 日本建築学会構造系論文集 |
巻: | 80 |
号: | 716 |
開始ページ: | 1559 |
終了ページ: | 1567 |
抄録: | A new stiffness identification method for a building structure is proposed in the case where the building includes an unknown vibration source. The stiffnesses above the vibration source are determined by the theory for the base input and those below the vibration source are obtained by the theory for the top forced input. The ratios between shear stiffnesses of lower consecutive stories can be obtained from the floor acceleration data and the ratios of the story rotational stiffness to the shear stiffness (SR stiffness ratio). The shear stiffness coefficients and the SR stiffness ratios can be obtained finally to satisfy the compatibility of lower natural frequencies. The validity of the proposed method is examined through numerical simulation and actual recorded data. |
著作権等: | © 2015 日本建築学会 (Architectural Institute of Japan) 日本建築学会の許可を得て登録しています. |
URI: | http://hdl.handle.net/2433/217359 |
DOI(出版社版): | 10.3130/aijs.80.1559 |
出現コレクション: | 学術雑誌掲載論文等 |
このリポジトリに保管されているアイテムはすべて著作権により保護されています。