ダウンロード数: 143
このアイテムのファイル:
ファイル | 記述 | サイズ | フォーマット | |
---|---|---|---|---|
aijs.80.1559.pdf | 3.17 MB | Adobe PDF | 見る/開く |
完全メタデータレコード
DCフィールド | 値 | 言語 |
---|---|---|
dc.contributor.author | 城野, みなみ | ja |
dc.contributor.author | 藤田, 皓平 | ja |
dc.contributor.author | 竹脇, 出 | ja |
dc.contributor.alternative | Shirono, Minami | en |
dc.contributor.alternative | Fujita, Kohei | en |
dc.contributor.alternative | Takewaki, Izuru | en |
dc.date.accessioned | 2016-11-22T00:22:22Z | - |
dc.date.available | 2016-11-22T00:22:22Z | - |
dc.date.issued | 2015-10 | - |
dc.identifier.issn | 1340-4202 | - |
dc.identifier.uri | http://hdl.handle.net/2433/217359 | - |
dc.description.abstract | A new stiffness identification method for a building structure is proposed in the case where the building includes an unknown vibration source. The stiffnesses above the vibration source are determined by the theory for the base input and those below the vibration source are obtained by the theory for the top forced input. The ratios between shear stiffnesses of lower consecutive stories can be obtained from the floor acceleration data and the ratios of the story rotational stiffness to the shear stiffness (SR stiffness ratio). The shear stiffness coefficients and the SR stiffness ratios can be obtained finally to satisfy the compatibility of lower natural frequencies. The validity of the proposed method is examined through numerical simulation and actual recorded data. | en |
dc.format.mimetype | application/pdf | - |
dc.language.iso | jpn | - |
dc.publisher | 日本建築学会 | ja |
dc.publisher.alternative | Architectural Institute of Japan | en |
dc.rights | © 2015 日本建築学会 (Architectural Institute of Japan) | ja |
dc.rights | 日本建築学会の許可を得て登録しています. | ja |
dc.subject | システム同定 | ja |
dc.subject | 構造ヘルスモニタリング | ja |
dc.subject | 未知の振動源 | ja |
dc.subject | 曲げせん断型モデル | ja |
dc.subject | ARXモデル | ja |
dc.subject | System identification | en |
dc.subject | Structural health monitoring | en |
dc.subject | Unknown vibration source | en |
dc.subject | Bending-shear model | en |
dc.subject | ARX model | en |
dc.title | 曲げせん断型モデルとARXモデルを用いた強制加振による建物のシステム同定 | ja |
dc.title.alternative | STIFFNESS IDENTIFICATION of BUILDING with UNKNOWN VIBRATION SOURCE USING BENDING-SHEAR MODEL and ARX MODEL | en |
dc.type | journal article | - |
dc.type.niitype | Journal Article | - |
dc.identifier.jtitle | 日本建築学会構造系論文集 | ja |
dc.identifier.volume | 80 | - |
dc.identifier.issue | 716 | - |
dc.identifier.spage | 1559 | - |
dc.identifier.epage | 1567 | - |
dc.relation.doi | 10.3130/aijs.80.1559 | - |
dc.textversion | publisher | - |
dcterms.accessRights | open access | - |
dc.identifier.jtitle-alternative | Journal of Structural and Construction Engineering | en |
出現コレクション: | 学術雑誌掲載論文等 |
このリポジトリに保管されているアイテムはすべて著作権により保護されています。