このアイテムのアクセス数: 20

このアイテムのファイル:
ファイル 記述 サイズフォーマット 
j.nme.2018.05.019.pdf2.58 MBAdobe PDF見る/開く
タイトル: Microstructure and mechanical properties of mechanically alloyed ODS copper alloy for fusion material application
著者: Aghamiri, S.M.S.
Oono, N.
Ukai, S.
Kasada, R.
Noto, H.
Hishinuma, Y.
Muroga, T.
著者名の別形: 笠田, 竜太
キーワード: ODS copper
Mechanical alloying
Microstructure
Mechanical properties
発行日: May-2018
出版者: Elsevier BV
誌名: Nuclear Materials and Energy
巻: 15
開始ページ: 17
終了ページ: 22
抄録: Advanced oxide dispersion strengthened copper alloys are promising structural materials for application in divertor system of future fusion reactors due to high irradiation resistance, high thermal conductivity, and good mechanical properties. In this study, a new ODS copper including 0.42wt%Y₂O₃ nanosized oxide particles was developed successfully by mechanical alloying method using addition of 1 wt% Stearic acid in Ar atmosphere. Mechanical alloying resulted in decrease of crystallite size to 28 nm in concurrent with increment of dislocation density and hardness to the saturated level of 1.7 × 10¹⁵m⁻² and 226HV₀.₁ after 48 h milling, respectively. Consolidated ODS copper by SPS and then hot roll-annealing at 900°C/60 min showed an average grain size of 1.1 µm with a near random texture. Furthermore, TEM observations demonstrated fine semicoherent Y₂O₃ oxide particles distributed with a misfit parameter (δ) of 0.17 in copper matrix with an average size of 10.8 nm and interparticle spacing of 152 nm. Finally, tensile test evaluation determined comparable mechanical properties of the annealed ODS copper (Cu-0.42wt%Y₂O₃) with Glidcop-Al25 including a yield strength of 272 MPa and total elongation of 12%, by two mechanisms of grain boundary strengthening and oxide particle strengthening.
著作権等: © 2018 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/BY-NC-ND/4.0/).
URI: http://hdl.handle.net/2433/233814
DOI(出版社版): 10.1016/j.nme.2018.05.019
出現コレクション:学術雑誌掲載論文等

アイテムの詳細レコードを表示する

Export to RefWorks


出力フォーマット 


このリポジトリに保管されているアイテムはすべて著作権により保護されています。