このアイテムのアクセス数: 143

このアイテムのファイル:
ファイル 記述 サイズフォーマット 
1757-899x.219.1.012055.pdf1.04 MBAdobe PDF見る/開く
タイトル: Enhanced mechanical properties in fully recrystallized ultrafine grained ZKX600 Mg alloy
著者: Zheng, Ruixiao
Bhattacharjee, Tilak
Gao, Si  kyouindb  KAKEN_id  orcid https://orcid.org/0000-0002-6430-4172 (unconfirmed)
Gong, Wu
Shibata, Akinobu  KAKEN_id
Sasaki, Taisuke
Hono, Kazuhiro
Tsuji, Nobuhiro  kyouindb  KAKEN_id  orcid https://orcid.org/0000-0002-2132-1327 (unconfirmed)
著者名の別形: 鄭, 瑞暁
高, 斯
龔, 武
柴田, 曉伸
辻, 伸泰
発行日: 1-Aug-2017
出版者: IOP Publishing
誌名: IOP Conference Series: Materials Science and Engineering
巻: 219
論文番号: 012055
抄録: Mg-Zn-Zr-Ca (ZKX600) alloy specimens with various fully recrystallized grain sizes ranging from 0.77 μm to 23.3 μm were fabricated by high pressure torsion (HPT) followed by subsequent annealing. Tensile tests carried out at room temperature revealed that ultrafine grained (UFG) specimens exhibited enhanced combinations of strength and ductility compared to their coarse-grained counterparts. Observation of deformation microstructures suggested that basal slip and {10-12} extension twinning were the dominant mechanisms during deformation of coarse grained specimens, while deformation twinning was significantly inhibited in the UFG specimens. Based on the observations it is proposed that non-basal slip activity is responsible for the enhanced mechanical properties, and should be the focus of further investigations.
記述: 38th Risø International Symposium on Materials Science 4–8 September 2017, Risø, Denmark
著作権等: Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. Published under licence by IOP Publishing Ltd.
URI: http://hdl.handle.net/2433/234989
DOI(出版社版): 10.1088/1757-899x/219/1/012055
出現コレクション:学術雑誌掲載論文等

アイテムの詳細レコードを表示する

Export to RefWorks


出力フォーマット 


このリポジトリに保管されているアイテムはすべて著作権により保護されています。