ダウンロード数: 197
このアイテムのファイル:
ファイル | 記述 | サイズ | フォーマット | |
---|---|---|---|---|
jsmemecj.2012._G070033-1.pdf | 822.34 kB | Adobe PDF | 見る/開く |
タイトル: | アフター噴射を用いたディーゼル燃焼における混合気形成・燃焼過程の解析 |
その他のタイトル: | Analysis of Combustion Process in Diesel Combustion with After Injection |
著者: | 山田, 竜久 吉田, 和希 堀部, 直人 https://orcid.org/0000-0002-7126-2986 (unconfirmed) 石山, 拓二 |
著者名の別形: | Yamada, Tatsuhisa Yoshida, Kazuki Horibe, Naoto Ishiyama, Takuji |
キーワード: | Diesel Engine After Injection Combustion Fuel Spray Constant Volume Vessel |
発行日: | 9-Sep-2012 |
出版者: | 日本機械学会 |
誌名: | 年次大会 |
巻: | 2012 |
論文番号: | G070033 |
抄録: | This study aims to investigate the combustion process and soot formation in diesel combustion with main/after injection. Heat release rates and high-speed photographs of luminous flame were analyzed changing injection interval and after-injection quantity using a constant volume vessel equipped with a multi-hole nozzle. The results show that luminous flame is still observed in the later stage of combustion for longer injection interval. Luminous flame decays earlier as the quantity of after injection decreases. With the lowest quantity of after injection, luminous flame disappears earlier than in the case of single injection. |
記述: | 日本機械学会2012年度年次大会 2012.9.9-12 |
著作権等: | 発行元の許可を得て登録しています. This is not the published version. Please cite only the published version. この論文は出版社版でありません。引用の際には出版社版をご確認ご利用ください。 |
URI: | http://hdl.handle.net/2433/239405 |
DOI(出版社版): | 10.1299/jsmemecj.2012._G070033-1 |
出現コレクション: | 学術雑誌掲載論文等 |
このリポジトリに保管されているアイテムはすべて著作権により保護されています。