ダウンロード数: 262
このアイテムのファイル:
| ファイル | 記述 | サイズ | フォーマット | |
|---|---|---|---|---|
| 1882-0786_ab2c96.pdf | 619.05 kB | Adobe PDF | 見る/開く |
| タイトル: | Fabrication of (101)-oriented CsPbBr₃ thick films with high carrier mobility using a mist deposition method |
| 著者: | Haruta, Yuki Ikenoue, Takumi    https://orcid.org/0000-0002-3753-6453 (unconfirmed)Miyake, Masao https://orcid.org/0000-0001-8208-4030 (unconfirmed)Hirato, Tetsuji https://orcid.org/0000-0003-3030-1632 (unconfirmed) |
| 著者名の別形: | 池之上, 卓己 三宅, 正男 平藤, 哲司 |
| 発行日: | 1-Aug-2019 |
| 出版者: | Institute of Physics Publishing |
| 誌名: | Applied Physics Express |
| 巻: | 12 |
| 号: | 8 |
| 論文番号: | 085505 |
| 抄録: | CsPbBr₃ is a promising candidate for highly sensitive flat-panel X-ray detectors due to its excellent optoelectronic properties. Thus, a method of preparing thick CsPbBr₃ films (>10 μm) over large areas (>10 × 10 cm²) is required. Herein, we report the fabrication of thick CsPbBr₃ films using a scalable mist deposition method. In this method, the film thickness was controlled and up-scaled by the number of deposition cycles. The obtained CsPbBr₃ films were composed of highly (101)-oriented columnar crystals and had a high carrier mobility of 13 cm² V⁻¹ s⁻¹, which is comparable to that for single crystals. |
| 著作権等: | This is an author-created, un-copyedited version of an article accepted for publication/published in Applied Physics Express. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://doi.org/10.7567/1882-0786/ab2c96. This is not the published version. Please cite only the published version. この論文は出版社版でありません。引用の際には出版社版をご確認ご利用ください。 |
| URI: | http://hdl.handle.net/2433/252471 |
| DOI(出版社版): | 10.7567/1882-0786/ab2c96 |
| 出現コレクション: | 学術雑誌掲載論文等 |
このリポジトリに保管されているアイテムはすべて著作権により保護されています。