ダウンロード数: 17

このアイテムのファイル:
ファイル 記述 サイズフォーマット 
1361-6501_abeccb.pdf3.53 MBAdobe PDF見る/開く
タイトル: Two-dimensional fluid viscosity measurement in microchannel flow using fluorescence polarization imaging
著者: Kuriyama, Reiko  kyouindb  KAKEN_id  orcid https://orcid.org/0000-0003-3619-7370 (unconfirmed)
Nakagawa, Tomotaka
Tatsumi, Kazuya
Nakabe, Kazuyoshi
著者名の別形: 栗山, 怜子
巽, 和也
中部, 主敬
キーワード: Fluid viscosity
Microchannel flow
Fluorescence polarization
Rotational Brownian motion
Two-dimensional distribution
Polarization degree
発行日: Sep-2021
出版者: IOP Publishing
誌名: Measurement Science and Technology
巻: 32
号: 9
論文番号: 095402
抄録: This study describes the development of a noncontact and two-dimensional fluid viscosity measurement technique based on fluorescence polarization microscopy. This technique exploits fluorescence depolarization due to rotational Brownian motion of fluorophores and determines fluid viscosity in microchannel flow by measuring steady-state fluorescence polarization. The main advantage of the technique is that planar distributions of fluid viscosity can be visualized by noncontact optical measurement, while commonly-used mechanical viscometers measure the viscosity of bulk liquids. Moreover, steady-state polarization measurements are realized using a simpler experimental setup compared to other noncontact techniques such as time-resolved fluorescence lifetime/polarization measurements. The relationship between the fluid viscosity (μ) and the fluorescence polarization degree (𝘗) was experimentally obtained using casein molecules labeled with fluorescein isothiocyanate as a fluorescent probe. The fluid viscosity was controlled within the range of 0.7-3.0 mPa s, which is the range often encountered in biological materials, by mixing sucrose or glucose with the solution. The fluid temperature was maintained uniform at 30 °C during the measurement. The calibration result showed that 1/𝘗 linearly increased with 1/μ which qualitatively agreed well with the theoretical prediction. The measurement uncertainty was 7.5%-9.5% based on the slope of the calibration curve. The viscosity gradient generated by the mass diffusion between the two solutions co-flowing in the Y-shaped microchannel was clearly visualized under uniform temperature conditions by applying the calibration curve. Finally, the influence of the temperature change on 𝘗 was experimentally evaluated. The results supported the applicability of the present technique for visualization of the viscosity distribution induced by temperature change. These results confirmed the feasibility of the present technique for analyzing microscale viscosity fields associated with mass transport or temperature change.
著作権等: This is the Accepted Manuscript version of an article accepted for publication in Measurement Science and Technology. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://dx.doi.org/10.1088/1361-6501/abeccb
The full-text file will be made open to the public on 28 May 2022 in accordance with publisher's 'Terms and Conditions for Self-Archiving'.
This is not the published version. Please cite only the published version. この論文は出版社版でありません。引用の際には出版社版をご確認ご利用ください。
URI: http://hdl.handle.net/2433/287502
DOI(出版社版): 10.1088/1361-6501/abeccb
出現コレクション:学術雑誌掲載論文等

アイテムの詳細レコードを表示する

Export to RefWorks


出力フォーマット 


このリポジトリに保管されているアイテムはすべて著作権により保護されています。