ダウンロード数: 237
このアイテムのファイル:
ファイル | 記述 | サイズ | フォーマット | |
---|---|---|---|---|
J.Struct.Eng_75_648_337.pdf | 1.91 MB | Adobe PDF | 見る/開く |
タイトル: | アウトフレーム型連結制振構法におけるアウトフレーム及び連結ダンパーの応答低減比マップを用いた設計法 |
その他のタイトル: | STIFFNESS-DAMPING DESIGN IN OUTER-FRAME TYPE CONNECTING SEISMIC RETROFITTING VIA RESPONSE REDUCTION CONTOUR MAP |
著者: | 辻, 聖晃 中川, 大輔 吉富, 信太 竹脇, 出 https://orcid.org/0000-0002-5673-2409 (unconfirmed) |
著者名の別形: | TSUJI, Masaaki NAKAGAWA, Daisuke YOSHITOMI, Shinta TAKEWAKI, Izuru |
キーワード: | Response control by connecting damper Outer-frame type seismic retrofitting Elastic-plastic response Response spectrum method Response reduction contour map Equivalent linearization 連結制振 アウトフレーム型耐震補強 弾塑性応答 応答スペクトル法 応答低減比マップ 等価線形化 |
発行日: | 2010 |
出版者: | 日本建築学会 |
誌名: | 日本建築学会構造系論文集 |
巻: | 75 |
号: | 648 |
開始ページ: | 337 |
終了ページ: | 346 |
抄録: | The purpose of this paper is to propose a rational design approach to the seismic retrofitting of an existing building connected with an adjacent newly-built outer frame by viscous dampers. The mass and stiffness of the existing building together with the mass of the outer frame are given. Then the stiffness of the outer frame and the damping coefficient of the connecting dampers are found so that the requirements on the maximum interstory drift of the existing building are satisfied. By introducing a response reduction contour map in terms of the stiffness ratio κ and the connecting-damper damping ratio hR of the rigidly supported model, an approximate but effective design procedure is proposed. It is concluded that the proposed approach is an effective method for designing the outer frame and the connecting dampers. |
著作権等: | 日本建築学会 |
URI: | http://hdl.handle.net/2433/152204 |
DOI(出版社版): | 10.3130/aijs.75.337 |
出現コレクション: | 学術雑誌掲載論文等 |
このリポジトリに保管されているアイテムはすべて著作権により保護されています。