このアイテムのアクセス数: 125
このアイテムのファイル:
| ファイル | 記述 | サイズ | フォーマット | |
|---|---|---|---|---|
| 10.2493jjspe.75.520.pdf | 1.17 MB | Adobe PDF | 見る/開く |
完全メタデータレコード
| DCフィールド | 値 | 言語 |
|---|---|---|
| dc.contributor.author | 河野, 大輔 | ja |
| dc.contributor.author | 松原, 厚 | ja |
| dc.contributor.author | 小池, 雄介 | ja |
| dc.contributor.alternative | Kono, Daisuke | en |
| dc.contributor.alternative | Matsubara, Atsushi | en |
| dc.contributor.alternative | Koike, Yusuke | en |
| dc.contributor.transcription | コウノ, ダイスケ | ja-Kana |
| dc.contributor.transcription | マツバラ, アツシ | ja-Kana |
| dc.contributor.transcription | コイケ, ユウスケ | ja-Kana |
| dc.date.accessioned | 2012-03-06T05:15:38Z | - |
| dc.date.available | 2012-03-06T05:15:38Z | - |
| dc.date.issued | 2009-04 | - |
| dc.identifier.issn | 0912-0289 | - |
| dc.identifier.uri | http://hdl.handle.net/2433/153352 | - |
| dc.description.abstract | This study investigates the copying rate of tool motions to workpiece profiles. A machining system is developed to measure tool motions and workpiece profiles during machining processes. Tool motions are measured with a laser displacement sensor and an artifact. Workpiece profiles are measured by scanning type on-machine measurement. Sinusoidal profiles with various amplitudes are machined with a diamond tool to compare tool motions and workpiece profiles. The experimental result shows that the commanded motions and vibrations are copied on workpiece profiles. The ratios between the amplitudes of motions and profiles are calculated in the frequency domain to identify the copying rate. It is verified that the commanded motions are almost perfectly copied under the amplitudes of from 0.5 μm to 4 μm and the developed system is able to identify the copying rate under the amplitudes of from 0.5 μm to 1 μm. | en |
| dc.format.mimetype | application/pdf | - |
| dc.language.iso | jpn | - |
| dc.publisher | 精密工学会 | ja |
| dc.rights | 精密工学会 | ja |
| dc.subject | tool motion | en |
| dc.subject | workpiece profile | en |
| dc.subject | on-machine measurement | en |
| dc.subject | copying rate | en |
| dc.subject | measurement-fused machining system | en |
| dc.title | 計測融合型加工システムによる工具刃先運動の転写率の測定 | ja |
| dc.type | journal article | - |
| dc.type.niitype | Journal Article | - |
| dc.identifier.ncid | AN1003250X | - |
| dc.identifier.jtitle | 精密工学会誌 | ja |
| dc.identifier.volume | 75 | - |
| dc.identifier.issue | 4 | - |
| dc.identifier.spage | 520 | - |
| dc.identifier.epage | 524 | - |
| dc.relation.doi | 10.2493/jjspe.75.520 | - |
| dc.textversion | publisher | - |
| dcterms.accessRights | open access | - |
| 出現コレクション: | 学術雑誌掲載論文等 | |
このリポジトリに保管されているアイテムはすべて著作権により保護されています。