このアイテムのアクセス数: 204

このアイテムのファイル:
ファイル 記述 サイズフォーマット 
jjsem.17.124.pdf17.39 MBAdobe PDF見る/開く
完全メタデータレコード
DCフィールド言語
dc.contributor.author石井, 陽介ja
dc.contributor.author琵琶, 志朗ja
dc.contributor.author足立, 忠晴ja
dc.contributor.alternativeISHII, Yosukeen
dc.contributor.alternativeBIWA, Shiroen
dc.contributor.alternativeADACHI Tadaharuen
dc.date.accessioned2018-10-02T04:54:33Z-
dc.date.available2018-10-02T04:54:33Z-
dc.date.issued2017-07-21-
dc.identifier.issn1346-4930-
dc.identifier.urihttp://hdl.handle.net/2433/234649-
dc.description.abstractThe interlaminar interfacial stiffnesses and the ply complex elastic constants of carbon/epoxy composite laminates were evaluated nondestructively from the ultrasonic wave transmission characteristics. Using the through-transmission immersion technique, the energy transmission coefficient of longitudinal wave was measured for unidirectional, quasi-isotropic, and cross-ply composite laminates made of the same UD prepregs for various frequencies and incident directions. The results were then fitted to the theoretical ones calculated by the stiffness-matrix approach with the thin interlaminar resin-rich regions modeled as interfaces with normal and tangential springs in order to identify the interlaminar interfacial stiffnesses as well as the anisotropic viscoelastic constants of the ply constituting the laminates. The validity of the evaluation method was verified on the basis of the experimental results. The evaluated ply complex moduli were found to have comparable values irrespective of the stacking sequence of the laminate. On the other hand, the interlaminar interfacial stiffnesses were found to be smaller when the neighboring plies had the different fiber orientation angles.en
dc.format.mimetypeapplication/pdf-
dc.language.isojpn-
dc.publisher日本実験力学会ja
dc.publisher.alternativeThe Japanese Society for Experimental Mechanicsen
dc.rights出版元の許可を得て掲載しています。ja
dc.subjectUltrasonic nondestructive evaluationen
dc.subjectComposite laminateen
dc.subjectInterlaminar interfacial stiffnessen
dc.subjectStiffness-matrix methoden
dc.subjectSpring-type interface modelen
dc.title超音波透過特性を用いた炭素繊維強化複合材料積層板の層間界面剛性およびプライ複素弾性率の評価ja
dc.title.alternativeEvaluation of Interlaminar Interfacial Stiffnesses and Ply Complex Moduli of Carbon/Epoxy Composite Laminates by Ultrasonic Transmission Characteristicsen
dc.typejournal article-
dc.type.niitypeJournal Article-
dc.identifier.ncidAA11822914-
dc.identifier.jtitle実験力学ja
dc.identifier.volume17-
dc.identifier.issue2-
dc.identifier.spage124-
dc.identifier.epage130-
dc.relation.doi10.11395/jjsem.17.124-
dc.textversionpublisher-
dc.address豊橋技術科学大学 機械工学系ja
dc.address京都大学 大学院工学研究科 航空宇宙工学専攻ja
dc.address豊橋技術科学大学 機械工学系ja
dc.relation.NAID130005865219-
dcterms.accessRightsopen access-
datacite.awardNumberJP25・1754-
datacite.awardNumberJP15K13833-
dc.identifier.pissn1346-4930-
dc.identifier.jtitle-alternativeJournal of the Japanese Society for Experimental Mechanicsen
jpcoar.funderName日本学術振興会ja
jpcoar.funderName日本学術振興会ja
jpcoar.funderName.alternativeJapan Society for the Promotion of Science (JSPS)en
jpcoar.funderName.alternativeJapan Society for the Promotion of Science (JSPS)en
出現コレクション:学術雑誌掲載論文等

アイテムの簡略レコードを表示する

Export to RefWorks


出力フォーマット 


このリポジトリに保管されているアイテムはすべて著作権により保護されています。