1. Kyoto University Research Information Repository
  2. 090　工学研究科・工学部
  3. 学術雑誌掲載論文等
このアイテムのアクセス数: 140

    このアイテムの引用には次の識別子を使用してください: http://hdl.handle.net/2433/235328
このアイテムのファイル:
ファイル 記述 サイズフォーマット 
1757-899X_424_1_012074.pdf378.75 kBAdobe PDF見る/開く
完全メタデータレコード
DCフィールド値言語
dc.contributor.authorOno, Keizoen
dc.contributor.authorHashimoto, Ayumuen
dc.contributor.authorKurokawa, Keijien
dc.contributor.authorNakatsuka, Noriakien
dc.contributor.authorMorishita, Koheien
dc.contributor.authorYasuda, Hideyukien
dc.contributor.alternative小野, 恵三ja
dc.contributor.alternative橋本, 歩ja
dc.contributor.alternative黒川, 恵史ja
dc.contributor.alternative中塚, 憲章ja
dc.contributor.alternative森下, 浩平ja
dc.contributor.alternative安田, 秀幸ja
dc.date.accessioned2018-11-26T00:52:10Z-
dc.date.available2018-11-26T00:52:10Z-
dc.date.issued2018-10-13-
dc.identifier.issn1757-8981-
dc.identifier.urihttp://hdl.handle.net/2433/235328-
dc.description9th International Symposium on Electromagnetic Processing of Materials (EPM2018)14–18 October 2018, Hyogo, Japanen
dc.description.abstractThis paper demonstrates three-dimensional alignment of ß-FcSi2 in sintered bulk specimens. The three-dimensional alignment was achieved by using an oscillating magnetic field during slip-casting under a magnetic field of 6T. Sintering using direct electric current heating was performed in various conditions. The degree of alignment did not significantly degrade during sintering process. Apparent density became as high as 97%. The degree of alignment tended to increase as grain size increased.en
dc.format.mimetypeapplication/pdf-
dc.language.isoeng-
dc.publisherIOP Publishingen
dc.rightsContent from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.en
dc.subjectMagnetic orientationen
dc.subjectcrystallographic alignmenten
dc.subjectmagnetic anisotropyen
dc.subjectanisotropic magnetic fielden
dc.titleHigh-Density β-FeSi2 crystals with 3D alignment fabricated by an oscillating magnetic fielden
dc.typeconference paper-
dc.type.niitypeConference Paper-
dc.identifier.jtitleIOP Conference Series: Materials Science and Engineeringen
dc.identifier.volume424-
dc.relation.doi10.1088/1757-899X/424/1/012074-
dc.textversionpublisher-
dc.identifier.artnum012074-
dc.addressDepartment of Materials Science and Engineering, Kyoto Universityen
dc.addressDepartment of Materials Science and Engineering, Kyoto Universityen
dc.addressDepartment of Materials Science and Engineering, Kyoto Universityen
dc.addressDepartment of Materials Science and Engineering, Kyoto Universityen
dc.addressDepartment of Materials Science and Engineering, Kyoto Universityen
dc.addressDepartment of Materials Science and Engineering, Kyoto Universityen
dcterms.accessRightsopen access-
dc.identifier.pissn1757-8981-
dc.identifier.eissn1757-899X-
出現コレクション:学術雑誌掲載論文等

アイテムの簡略レコードを表示する

Export to RefWorks


出力フォーマット 


このリポジトリに保管されているアイテムはすべて著作権により保護されています。