このアイテムのアクセス数: 163
このアイテムのファイル:
| ファイル | 記述 | サイズ | フォーマット | |
|---|---|---|---|---|
| j.procir.2018.08.225.pdf | 855.87 kB | Adobe PDF | 見る/開く |
完全メタデータレコード
| DCフィールド | 値 | 言語 |
|---|---|---|
| dc.contributor.author | Matsubara, Atsushi | en |
| dc.contributor.author | Nagai, Hiroaki | en |
| dc.contributor.author | Knorr, Nils | en |
| dc.contributor.author | Kono, Daisuke | en |
| dc.contributor.alternative | 松原, 厚 | ja |
| dc.contributor.alternative | 河野, 大輔 | ja |
| dc.date.accessioned | 2019-09-26T07:42:15Z | - |
| dc.date.available | 2019-09-26T07:42:15Z | - |
| dc.date.issued | 2018 | - |
| dc.identifier.issn | 2212-8271 | - |
| dc.identifier.uri | http://hdl.handle.net/2433/244155 | - |
| dc.description.abstract | A passive support with a pivot mechanism was previously designed for increasing damping of the vibration modes of a flexible structure. Here, to investigate the influence of the contact conditions between the pivot support and a flexible plate, the contact area is discretised into line contacts using metal rollers. The effect of contact stiffness is also investigated using additional plastic rings. Impact hammering tests are conducted and measured dynamic compliances are compared. Machining tests are subsequently performed to confirm vibration suppression. The line contacts are found to exhibit good vibration suppression capability in both the vibration and machining tests. | en |
| dc.format.mimetype | application/pdf | - |
| dc.language.iso | eng | - |
| dc.publisher | Elsevier BV | en |
| dc.rights | © 2018 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0/) Selection and peer-review under responsibility of the International Scientific Committee of the 8th CIRP Conference on High Performance Cutting (HPC 2018). | en |
| dc.subject | machining vibration | en |
| dc.subject | support | en |
| dc.subject | damping | en |
| dc.subject | contact condition | en |
| dc.title | Influence of contact condition between flexible plate and passive pivot support on machining vibration | en |
| dc.type | conference paper | - |
| dc.type.niitype | Conference Paper | - |
| dc.identifier.jtitle | Procedia CIRP | en |
| dc.identifier.volume | 77 | - |
| dc.identifier.spage | 557 | - |
| dc.identifier.epage | 560 | - |
| dc.relation.doi | 10.1016/j.procir.2018.08.225 | - |
| dc.textversion | publisher | - |
| dcterms.accessRights | open access | - |
| datacite.awardNumber | 17H03157 | - |
| jpcoar.funderName | 日本学術振興会 | ja |
| jpcoar.funderName.alternative | Japan Society for the Promotion of Science (JSPS) | en |
| 出現コレクション: | 学術雑誌掲載論文等 | |
このリポジトリに保管されているアイテムはすべて著作権により保護されています。