ダウンロード数: 234
このアイテムのファイル:
ファイル | 記述 | サイズ | フォーマット | |
---|---|---|---|---|
IEICE-MI2019-72-31.pdf | 2.49 MB | Adobe PDF | 見る/開く |
タイトル: | 術中CBCT画像を用いた虚脱肺の変形解析の試み |
その他のタイトル: | A preliminary study on deformation analysis of collapsed lung using intraoperative CBCT images |
著者: | 前川, 日南子 ![]() 中尾, 恵 ![]() ![]() ![]() 峯浦, 一貴 ![]() 芳川, 豊史 ![]() 松田, 哲也 ![]() |
著者名の別形: | MAEKAWA, Hinako NAKAO, Megumi MINEURA, Katsutaka CHEN-YOSHIKAWA, Toyofumi F MATSUDA, Tetsuya |
キーワード: | 形状マッチング CBCT 画像 気胸変形 虚脱肺 Shape matching CBCT images pneumothorax deformation collapsed lung |
発行日: | 22-Jan-2020 |
出版者: | 電子情報通信学会 |
誌名: | 電子情報通信学会技術報告 (MI) |
巻: | 119 |
号: | 399 |
開始ページ: | 31 |
終了ページ: | 36 |
抄録: | 肺は手術時に虚脱するため,肺内部に複数発生しうる微小結節の位置同定が望まれる.術中に撮像されたCone-beam CT(CBCT) 画像により,肺全体の虚脱変形を推定するモデルを構築できる可能性がある.本研究では手術室において含気状態と虚脱状態で撮像された Paired CBCT 画像の位置合わせを行い,術中気胸の変形解析を行った.部分観測された大きな回転を含むデータに対応した位置合わせの枠組みを提案した.撮像時に肺表面に設置されたクリップを利用し,8 症例に対して平均誤差 3.9mm の位置合わせが達成されることを確認した.解析の結果,変位には収縮に加えて回転や肺門からの距離の影響が大きいことが確認された.Since the lung deforms during surgery, it is important to obtain the location of the tumor. Deformation of the whole lung could be estimated using intraoperative Cone-beam CT(CBCT) images. In this study, we registered the paired intraoperative CBCT images in the inflated and deflated states, and analyzed their deformation. Experimental results showed that the proposed methods reduced the error of point-to-point correspondence. As a result of registration using clips placed on the lung surface during imaging, it was confirmed that an average error of 3.9 mm was achieved in 8 cases. The result of analysis showed that both rotation and contraction had large effects on displacement. |
著作権等: | Copyright ©2020 by IEICE 技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
URI: | http://hdl.handle.net/2433/245873 |
関連リンク: | https://www.ieice.org/ken/paper/20200129s1un/ |
出現コレクション: | 学術雑誌掲載論文等 |
![](/dspace/image/articlelinker.gif)
このリポジトリに保管されているアイテムはすべて著作権により保護されています。