このアイテムのアクセス数: 524
このアイテムのファイル:
ファイル | 記述 | サイズ | フォーマット | |
---|---|---|---|---|
traverse_2_69.pdf | 3.22 MB | Adobe PDF | 見る/開く |
完全メタデータレコード
DCフィールド | 値 | 言語 |
---|---|---|
dc.contributor.author | 井上, 一朗 | ja |
dc.contributor.author | 宇野, 暢芳 | ja |
dc.contributor.alternative | INOUE, Kazuo | en |
dc.contributor.alternative | UNO, Nobuyoshi | en |
dc.contributor.transcription | イノウエ, カズオ | ja-Kana |
dc.contributor.transcription | ウノ, ノブヨシ | ja-Kana |
dc.date.accessioned | 2020-12-10T02:41:13Z | - |
dc.date.available | 2020-12-10T02:41:13Z | - |
dc.date.issued | 2001-06-18 | - |
dc.identifier.issn | 2435-6891 | - |
dc.identifier.uri | http://hdl.handle.net/2433/259492 | - |
dc.description.abstract | For developing high-strength bolted friction joints with much higher friction coefficients than conventional ones, friction mechanisms are studied first and then based on the mechanisms, conditions for realizing high friction coefficients should be clarified. Friction coefficients between steels with different hardness are discussed. Failure modes on the friction surface are examined theoretically and a new friction theory is established. This theory provides that friction coefficients depend on the following factors : shapes and angles of surface projection of the steel with higher hardness, hardness ratio of harder steel to softer one and stress ratio of compression stress on friction surface to tensile strength of softer steel. A friction coefficient of 1.2 becomes possible from the new provided friction theory. | en |
dc.format.mimetype | application/pdf | - |
dc.language.iso | jpn | - |
dc.publisher | traverse編集委員会 (京都大学・建築系教室) | ja |
dc.publisher.alternative | Traverse Editorial Committee, School of Architecture, Kyoto University | en |
dc.rights | © traverse編集委員会 2001 | ja |
dc.rights | © 2001 Traverse Editorial Committee | en |
dc.subject.ndc | 520 | - |
dc.title | 摩擦面の破壊機構と高摩擦鋼板の開発 | ja |
dc.title.alternative | Fracture Mechanism of Friction and Development of Splice-Plate with High-Friction Coefficient | en |
dc.type | departmental bulletin paper | - |
dc.type.niitype | Departmental Bulletin Paper | - |
dc.identifier.ncid | AA12126089 | - |
dc.identifier.jtitle | traverse : kyoto university architectural journal | en |
dc.identifier.volume | 2 | - |
dc.identifier.spage | 69 | - |
dc.identifier.epage | 79 | - |
dc.textversion | publisher | - |
dc.sortkey | 09 | - |
dc.address | 工学研究科生活空間学専攻教授 | ja |
dc.address | 新日本製鐵技術開発本部鋼構造研究開発センター | ja |
dc.relation.url | https://www.traverse-architecture.com/ | - |
dc.identifier.selfDOI | 10.14989/traverse_2_69 | - |
dcterms.accessRights | open access | - |
dc.identifier.eissn | 2435-6891 | - |
dc.identifier.jtitle-alternative | 新建築学研究 | ja |
出現コレクション: | Vol. 2 |

このリポジトリに保管されているアイテムはすべて著作権により保護されています。