ダウンロード数: 17

このアイテムのファイル:
ファイル 記述 サイズフォーマット 
mfeku_22_1_1.pdf617.37 kBAdobe PDF見る/開く
タイトル: Fundamental Analysis of an Electrohydraulic Servomechanism Operated by PWM Mode
著者: SAWAMURA, Taizo
HANAFUSA, Hideo
INUI, Takashi
発行日: 10-Mar-1960
出版者: Faculty of Engineering, Kyoto University
誌名: Memoirs of the Faculty of Engineering, Kyoto University
巻: 22
号: 1
開始ページ: 1
終了ページ: 12
抄録: When an electrohydraulic servomechanism is used as a high performance servo, the PWM mode is interesting for the reduction of required accuracy in manufacturing valves and for removing the effects such as frictions of various parts. The manufactured servomechanism is composed of a torquemotor, a flapper-nozzle, a spool valve and an actuator. The input current to the torquemotor is in the form of a pulse-width-modulated wave supplied by a multivibrator, and the displacements of the flapper and the spool are restricted by the stoppers. The forces acting on the flapper caused by jets from nozzles are analyzed, and it is shown that the forces become as small as negligible, and sometimes accelerate the the flapper movement with a proper choice of discharge coefficient of nozzle. This means that the flapper-nozzle is favorable for a preamplifier in the PWM mode operation. As the results of the analysis, the displacement of the spool is approximately in the form of a trapezoidal pulse with certain time lag for the input to the torquemotor. When the load of the actuator consists of a mass and friction, the dither amplitude of the actuator piston is obtained exactly for the trapezoidal pulse input. The pulse period is determined by the waveshape of the spool displacement and the dither amplitude of the actuator piston. The analytical results were verified by experiments.
URI: http://hdl.handle.net/2433/280456
出現コレクション:Vol.22 Part 1

アイテムの詳細レコードを表示する

Export to RefWorks


出力フォーマット 


このリポジトリに保管されているアイテムはすべて著作権により保護されています。