ダウンロード数: 18

このアイテムのファイル:
ファイル 記述 サイズフォーマット 
j.ijplas.2022.103510.pdf16.96 MBAdobe PDF見る/開く
タイトル: Room-temperature plastic deformation of single crystals of α-manganese - Hard and brittle metallic element
著者: Kishida, Kyosuke  kyouindb  KAKEN_id  orcid https://orcid.org/0000-0003-0391-5022 (unconfirmed)
Suzuki, Hirotaka
Okutani, Masaomi
Inui, Haruyuki  kyouindb  KAKEN_id  orcid https://orcid.org/0000-0003-0835-6725 (unconfirmed)
著者名の別形: 岸田, 恭輔
鈴木, 広崇
奥谷, 将臣
乾, 晴行
キーワード: Manganese
Deformation structure
Dislocations
Mechanical properties
Micropillar compression
発行日: Jan-2023
出版者: Elsevier BV
誌名: International Journal of Plasticity
巻: 160
論文番号: 103510
抄録: The deformation behavior of single crystals of α-manganese has been investigated by micropillar compression at room temperature as a function of crystal orientation and specimen size. When the specimen size is reduced to the micrometer-range, single crystals of α-manganese are found to plastically deform by dislocation motion at room temperature for the first time, accompanied by very high yield stresses of the range of 4–6 GPa. Slip along [111] and [001] are identified to operate for compression axis orientations near [001] and near [011] and [111], respectively. Any low-indexed planes cannot be designated as the slip plane for both slip along [111] and [001], because of the significantly wavy nature of slip lines caused by the occurrence of frequent crossslip. Slip along [111] tends to prefer the slip plane of {112} rather than {110}. Slip along [001], on the other hand, tends to occur on the maximum resolved shear stress plane. The 1/2[111] dislocation carrying slip along [111] moves as a perfect dislocation without dissociating into partials and does not have any preferred orientation. The [001] dislocation carrying slip along [001] also moves as a perfect dislocation without dissociating into partials. Although the Peierls stress for the motion of these dislocations must be very high, there seems no deep Peierls valleys along particular directions, unlike the screw direction for the 1/2[111] dislocation in bodycentered cubic metals.
著作権等: © 2022 The Author(s). Published by Elsevier Ltd.
This is an open access article under the CC BY-NC-ND license
URI: http://hdl.handle.net/2433/287269
DOI(出版社版): 10.1016/j.ijplas.2022.103510
出現コレクション:学術雑誌掲載論文等

アイテムの詳細レコードを表示する

Export to RefWorks


出力フォーマット 


このアイテムは次のライセンスが設定されています: クリエイティブ・コモンズ・ライセンス Creative Commons