ダウンロード数: 784

このアイテムのファイル:
ファイル 記述 サイズフォーマット 
KJ00000017861.pdf426.62 kBAdobe PDF見る/開く
タイトル: <Ogirinal>Tensile Shear Creep Test of Steel-Balsa-Steel Sandwich Panel as Floor Deck (II) : Development of Simple Shear Creep Test Machine
著者: REZENDE, Maria Teresa R.
SASAKI, Hikaru
SHIRAKI, Yoshio
TANAKA, Yasunori
発行日: 28-Dec-1987
出版者: Wood Research Institute, Kyoto University
誌名: Wood research : bulletin of the Wood Research Institute Kyoto University
巻: 74
開始ページ: 23
終了ページ: 32
抄録: A simple shear creep test machine was proposed and creep test was made with ASTM standard shape specimens. Also comparative measuring method of shear deformation was discussed. The results obtained were as follows: 1) The test machine made as a prototype for tensile shear creep test was capable to transmit more than 1,300 kgf to the specimens so it would be suitable for test about 69% of shear strength (P_<max>=1,896 kgf), 2) The measuring method of shear deformation, which had the measurement points mounted on brass tips placed on loading plates edge, can be considered practical. Although the glue-line deformation between specimen and loading plates tested have been neglected. Prototype with accuracy and lower costs was achieved. Therefore, it is possible to extend the creep test period or to make simultaneous tests on many specimens when constructing several test machine.
記述: この論文は国立情報学研究所の学術雑誌公開支援事業により電子化されました。
URI: http://hdl.handle.net/2433/53295
出現コレクション:No.74

アイテムの詳細レコードを表示する

Export to RefWorks


出力フォーマット 


このリポジトリに保管されているアイテムはすべて著作権により保護されています。