ダウンロード数: 113

このアイテムのファイル:
ファイル 記述 サイズフォーマット 
a43b2p42.pdf5.22 MBAdobe PDF見る/開く
タイトル: Evaluation of Waste Sludge as Landfill Cover
著者: RAJASEKARAN, Govindasamy
KAMON, Masashi
KATSUMI, Takeshi
INAZUMI, Shinya
著者名の別形: RAJASEKARAN, Govindasamy
嘉門, 雅史
勝見, 武
稲積, 真哉
キーワード: 透水係数
処分場カバーシステム
せん断特性
X線回折
電子顕微鏡
汚泥
hydraulic conductivity
landfill cover
shear strength
x-ray diffraction
scanning electron microcopy
waste sludge
発行日: 1-Apr-2000
出版者: 京都大学防災研究所
誌名: 京都大学防災研究所年報. B
巻: 43
号: B-2
開始ページ: 515
終了ページ: 523
抄録: 近年, 我が国では廃棄物処分場における残余年数の切迫等により, 廃棄物の有効利用が積極的に行われている。そのような状況下, 本研究では廃棄物である汚泥材料の廃棄物処分場カバー材としての適用性を検討するものであり, 汚泥材料として製紙汚泥および建設汚泥に着目した。室内試験では, 汚泥材料の工学的諸特性, 透水試験, 圧縮試験, およびせん断試験を実施することでカバー材としての安定性を検討した。さらに, 廃棄物の有効利用に伴う環境影響評価として, 透水試験後の排出液中の有害物質含有量分析を行っている。結果として, 製紙汚泥, 建設汚泥とも有効利用に伴う環境適合性は満足しており, さらにカバー材として要求される機能を十分に有していることを明らかにした。
The objective of this paper is to examine the material properties of paper mill sludge (PMS) and construction sludge (CS) as landfill cover materials. Hydraulic conductivity, physical and engineering properties, and chemical analysis of effluents were investigated to evaluate the suitability of PMS and CS for cover application. X-ray diffraction and scanning electron microscopy analyses have been carried out to evaluate the mineralogical and microfabric arrangement of PMS and CS samples. The test results indicate that both PMS and CS fulfill the landfill cover requirements and encourage their utilization as alternative materials.
URI: http://hdl.handle.net/2433/80467
関連リンク: http://www.dpri.kyoto-u.ac.jp/nenpo/nenpo.html
出現コレクション:No.43 B-2

アイテムの詳細レコードを表示する

Export to RefWorks


出力フォーマット 


このリポジトリに保管されているアイテムはすべて著作権により保護されています。