このアイテムのアクセス数: 252
このアイテムのファイル:
ファイル | 記述 | サイズ | フォーマット | |
---|---|---|---|---|
j.egypro.2011.09.064.pdf | 461.27 kB | Adobe PDF | 見る/開く |
完全メタデータレコード
DCフィールド | 値 | 言語 |
---|---|---|
dc.contributor.author | Chuangchote, Surawut | en |
dc.contributor.author | Sagawa, Takashi | en |
dc.contributor.author | Yoshikawa, Susumu | en |
dc.contributor.alternative | 佐川, 尚 | ja |
dc.contributor.alternative | 吉川, 暹 | ja |
dc.date.accessioned | 2018-12-12T04:31:04Z | - |
dc.date.available | 2018-12-12T04:31:04Z | - |
dc.date.issued | 2011 | - |
dc.identifier.issn | 1876-6102 | - |
dc.identifier.uri | http://hdl.handle.net/2433/235662 | - |
dc.description | 9th Eco-Energy and Materials Science and Engineering Symposium, EMSES 2011 ; 25 May 2011 through 27 May 2011 ; Chiang Rai | en |
dc.description.abstract | An organic photovoltaic architecture based on conducting polymer and organic compounds deposited concentrically on long metal wires were introduced and designed. The light enters to photovoltaic cells through a semitransparent outer electrode. Preliminary tests on the potential to realize the model in conventional flat devices was carried out. Insertion of a hole collecting layer, poly (ethylene dioxythiophene) doped with polystyrene sulfonic acid (PEDOT: PSS), to between the active layer and the outer electrode, and increasing in the wettability of PEDOT: PSS solutions on polymer-thin films were found to increase in power conversion efficiencies of photovoltaic cells. The power conversion efficiency of 0.11% was obtained from the devices tested, which is reasonably high enough for further development in metal wires-based organic photovoltaic cells. | en |
dc.format.mimetype | application/pdf | - |
dc.language.iso | eng | - |
dc.publisher | Elsevier Ltd. | en |
dc.rights | © 2011 Published by Elsevier Ltd. Open access under CC BY-NC-ND license. | en |
dc.subject | conducting polymer | en |
dc.subject | metal wire | en |
dc.subject | organic photovoltaic cell | en |
dc.subject | power conversion efficiency | en |
dc.title | Design of Metal Wires-based Organic Photovoltaic Cells | en |
dc.type | conference paper | - |
dc.type.niitype | Conference Paper | - |
dc.identifier.jtitle | Energy Procedia | en |
dc.identifier.volume | 9 | - |
dc.identifier.spage | 553 | - |
dc.identifier.epage | 558 | - |
dc.relation.doi | 10.1016/j.egypro.2011.09.064 | - |
dc.textversion | publisher | - |
dc.address | Institute of Advanced Energy, Kyoto University | en |
dc.address | Institute of Advanced Energy, Kyoto University | en |
dc.address | Institute of Advanced Energy, Kyoto University | en |
dcterms.accessRights | open access | - |
datacite.awardNumber | 10F00079 | - |
jpcoar.funderName | 日本学術振興会 | ja |
jpcoar.funderName.alternative | Japan Society for the Promotion of Science (JSPS) | en |
出現コレクション: | 学術雑誌掲載論文等 |

このリポジトリに保管されているアイテムはすべて著作権により保護されています。